HP Officejet 5600 Ink Cartridge

Step 1:Remove,examine and reset the problem

  •    Ensure that the cartridges support the 123.hp.com/oj5600 printer. If the cartridges are not compatible with the printer,utilize authentic ink cartridge for the printer.
  •    Switch on the HP Officejet 5600 Printer. Unlock the cartridge access door. Pause until the printer carriage is inactive.
  •    Release the problematic cartridge by pressing down smoothly on one end. Move the cartridge out and examine it.
  •    Eliminate the protective tape from the cartridge.In case the cartridge is compatible,reinstall the HP Officejet 5600 Ink Cartridges.
  •    Seal the cartridge access door.Attempt to print again.Select the

Need Technical support call us.

HP Officejet 5600 Ink

Step 2:Wipe the cartridge and carriage electrical contacts.

  •    Organize clean cotton swabs,clean papers and distilled water to wipe the cartridge and carriage.
  •    Unlock the cartridge access door and refrain from proceedings until the carriage is inactive.
  •    Unplug the power cord from the hind side of the printer and from the system. Take away the cartridge and keep it on a paper.
  •    Using the dampen and clean cloth,cleanse the electrical contacts of the cartridges and carriage.
  •    Install the HP Officejet 5600 Ink Cartridges and reconnect the printer to turn it on.

Step 3:Reconfigure the printer

  •    Ensure whether the printer is on. In case the printer is in off state,press the power button to turn on the printer.
  •    With the HP Officejet 5600 switched on, detach the power cord from the hind side of the printer.
  •    Disconnect the power cable from the electrical socket.Halt for at least 15 seconds.
  •    Attach the power cable back into the electrical socket and to the hind side of the device.
  •    Press the power button to switch on the 123 HP Officejet 5600 printer. After customizing the printer,try to print the test page.

Step 4:Look for the problematic cartridge

  •    Unseal the cartridge access door.Wait for the carriage to be inactive prior to proceeding.
  •    Press the cartridge down for uninstalling it and then drag it forward to take out from the slot.
  •    Seal the cartridge access door. In case the incorrect Print cartridge error message screens,move to next step.
  •    In case the system does not screen any error message,substitute with the new cartridge .
  •    Redo the above procedure for other cartridge too.

Step 5:Replace the problematic cartridge.

  •    Turn on the 123.hp.com/oj5600 printer. Unlock the cartridge access door.the carriage slide to the right side of the printer.
  •    Halt until the carriage is inactive prior to continuing.To release the cartridge,press down on the top of the cartridge.
  •    Tug the cartridge towards you to eliminate it from the slot.Take away the new cartridge from the packaging.
  •    Tug the cartridge towards you to eliminate it from the slot.Take away the new cartridge from the packaging.
  •    Tug the cartridge towards you to eliminate it from the slot. Take away the new cartridge from the packaging.


123-hp.chat is a self-reliant or liberated website that guides users with the set up and installation instructions of an HP printer along with the troubleshooting solutions for the same. The context and images listed on this site are for reference purpose only. Go through our Privacy Policy prior to using our site.