STEPS TO PERFORM 123 HP PHOTOSMART 8450 PRINTER SETUP  

HP Photosmart 8450 is an InkJet printer mostly recommended for office and home use. It produces good quality prints at a speed of 20 pages per minute. 123 HP Photosmart 8450 printer setup is easy, and it is essential for the better performance of the printer. So, let’s get into the HP Photosmart 8450 setup without further delay.

123 HP Photosmart 8450 printer setup

Unboxing and Initial 123 HP Photosmart 8450 Printer Setup

The box contains the HP Photosmart 8450 printer, power cord, USB cable, print cartridges, installation CD, and a quick start guide. All the materials inside the box are recyclable.

  •   Take out the printer and remove all the other box contents.
  •   Remove all the packing tapes and protective materials around the printer.
  •   Open your HP printer’s ink cartridge access door; remove all the packaging materials, and cardboard inside the printer.
  •   Close the ink cartridge access door.
  •   Connect the power cord to the printer.
  •   Press your printer’s Power button and wait till the HP Photosmart 8450 printer is idle.
  •   Now, select your required Language and press Next.
  •   Select Region or Country and press Next.
  •   Set Time and Date and press OK.

Paper Loading Steps:

  •   Raise the output tray.
  •   Load a stack of paper into the paper tray with the print-side down.
  •   Adjust the paper guides until the paper fits into its place.
  •   Lower the output tray

Print Cartridges Installation:

  •   The HP Photosmart 8450 contains three print cartridges.
  •   Make sure that your HP printer is turned on.
  •   Open your HP printer’s front cover and wait until the cartridge holder comes to an installation position.
  •   Press each print cartridge latch and unhook it.
  •   Grab new print cartridges and remove the orange protective tape from their nozzle.

Note: Do not touch the copper nozzle or contacts.

  •   Insert print cartridge marked with the pentagon into the right side holder.
  •   Insert print cartridge marked with the triangle into the center holder.
  •   Insert print cartridge marked with the square into the left holder.
  •   Push down each cartridge until it fits inside its place.
  •   Close the latch and then the print cover.

HP PHOTOSMART 8450 DRIVER

The HP Photosmart 8450 printer driver is essential for the printer’s better performance. You can download and install the driver from the HP website. Let’s see the process of downloading and installing the HP Photosmart 8450 driver.

HP PHOTOSMART 8450 DRIVER DOWNLOAD

  •   On your computer, visit the Official HP website.
  •   Click on Software and Drivers and select Printer.
  •   Enter HP Photosmart 8450 in the product search bar and click on the Submit option.
  •   Click on Choose a different OS.
  •   Choose Windows from the Operating System drop-down menu.
  •   Select your Windows version from the Version drop-down menu and click Change.
  •   Click on All drivers.
  •   Select the required driver and click Download.

HP PHOTOSMART 8450 DRIVER INSTALL

  •   On your computer, open My Computer or This PC and open Downloads.
  •   Double-click on the downloaded file.
  •   A pop-up window appears. Select Yes to make changes to your computer.
  •   Check whether your printer is turned ON, the paper stack is loaded, and cartridges are installed.
  •   Click Continue.
  •   Accept the End-User License Agreement and click Next.
  •   The selected software will be installed.
  •   Select Manual 123 HP Photosmart 8450 printer setup and click Next.
  •   A connection option window appears, select USB (Wired) and click Next.
  •   Now, connect the USB cable between your printer and the computer.
  •   Go ahead with the on-screen instructions and click Finish.

HP PHOTOSMART 8450 USB SETUP

HP Photosmart 8450 supports a USB 2.0 high-speed connectivity option. To connect your HP Photosmart 8450 printer and the computer using a USB cable, follow the below steps.

  •   On your computer, visit the official HP website.
  •   Type HP Photosmart 8450 in the product search box and click Submit.
  •   Download and install the printer software.
  •   Follow the on-screen 123 HP Photosmart 8450 Printer Setup instructions.
  •   On the connection options screen, select USB.
  •   When prompted, connect the HP Photosmart 8450 printer to the computer using a USB cable.
  •   Go ahead with the on-screen instructions and complete the installation.
  •   Finally, print a test page and check whether the connection is working fine.

HP PHOTOSMART 8450 BLUETOOTH SETUP

HP Photosmart 8450 supports Bluetooth printing with the help of a separate adapter (Bluetooth adapter).

  •   Insert the Bluetooth adapter into the USB or Pictbridge port of the printer.
  •   Make sure that the HP driver and software are installed.
  •   Pair the HP printer and your mobile phone or computer.
  •   Now, start printing.

HP PHOTOSMART 8450 TROUBLESHOOTING

Apart from its benefits, HP Photosmart 8450 Printer may also end up with an issue like printer not working, not printing, printer offline, paper jam, etc. Let’s see some troubleshooting methods for solving these 123 HP Photosmart 8450 Printer Setup issues.

HP PHOTOSMART 8450 WON’T PRINT IN WINDOWS 10

Reset the Printer:

  •   Turn off your HP Photosmart 8450 printer and disconnect the power cord from its rear port.
  •   Unplug the power cord from the electrical socket.
  •   Wait for 15 minutes.
  •   Connect the power cord to the printer.
  •   Plug back the other end of the power cord into the electrical socket.
  •   Now, turn on your HP printer.

Cancel all print jobs:

  •   Open the Start menu and type Control in the search bar.
  •   Select Control Panel and click the Device and Printers tab.
  •   Choose your HP Photosmart 8450 printer and right-click on it.
  •   Select See what’s printing from the list.
  •   Click the Printer tab and select Open as Administrator from the menu.
  •   Open the printer menu again and select Cancel All Documents.
  •   Click on the Yes option to confirm.
  •   Now, check whether your issue is resolved.

Remove jammed paper:

  •   Turn off the HP printer and unplug it from the power socket.
  •   Raise the output tray.
  •   Check whether there is any paper jam in the paper path and remove it.
  •   Remove the rear access door and check whether there is any paper jam.
  •   Carefully remove the jammed paper from the printer.
  •   Replace the rear access door.
  •   Plug the power cord back into the printer and the electrical socket.
  •   Now, turn on the printer.

HP PHOTOSMART 8450 NOT PRINT

Use HP Smart app:

  •   Open the HP Smart app.
  •   Click Printers –>Diagnose & Fix –>Start.
  •   Wait until the analysis completes.
  •   On the Diagnose & Fix screen, view the results.
  •   Click Test Print.

Replace the print cartridges:

  •   Make sure that the printer is turned on.
  •   Open your HP printer’s cover and wait until the cartridge holder comes to the replacement position.
  •   Press down each print cartridge latch and unhook it.
  •   Remove the empty print cartridges.
  •   Grab the new print cartridges and remove the orange protective tape from the nozzle.

Note: Do not touch the copper nozzle or contacts.

  •   Insert print cartridge marked with the pentagon into the right side holder.
  •   Insert print cartridge marked with the triangle into the center holder.
  •   Insert print cartridge marked with the square into the left holder.
  •   Push down each cartridge until it fits inside its place.
  •   Close the latch and then the print cover.

HP PHOTOSMART 8450 OFFLINE

Check the power connection and reset the printer:

  •   Check whether the power cord is perfectly connected to the printer.
  •   Check the Power light. It indicates that the printer is receiving electrical power.
  •   Press the Power button to switch on the printer.
  •   Again, press the Power button to turn off your printer.
  •   Remove the power cord from the wall outlet.
  •   Wait for 15 minutes and plug the power cord back into the wall outlet.
  •   Now, turn on your printer and check whether the error message is disappeared.

Set as default printer:

  •   First, open the Windows Start menu.
  •   Type Control in the search bar.
  •   Select Control Panel and click on it.
  •   Click Hardware and Sound >Devices and Printers.
  •   Locate your HP Photosmart 8450 printer and right-click on it.
  •   Select Set as default 123 HP Photosmart 8450 printer.

Changing the printer properties:

  •   Go to Windows Start menu.
  •   Type Control Panel in the taskbar and click on it.
  •   Click Devices and Printers and right-click on the HP Photosmart 8450 printer.
  •   Select See What’s Printing and choose Printer Properties from the list.
  •   Now, modify the print settings and check whether the 123 HP Photosmart 8450 Printer Setup issue is resolved.

Disable the Offline Printer Option:

  •   On your PC, click the Windows Start icon.
  •   Type Control Panel in the taskbar and click on it.
  •   Click Devices and Printers and right-click on the HP Photosmart 8450  printer.
  •   Select See What’s Printing and check whether Use printer offline is enabled.
  •   If it is enabled, disable the option. If you have any further queries regarding 123 HP Photosmart 8450 printer setup, call us.

Disclaimer

123-hp.chat is a self-reliant or liberated website that guides users with the set up and installation instructions of an HP printer along with the troubleshooting solutions for the same. The context and images listed on this site are for reference purpose only. Go through our Privacy Policy prior to using our site.